Gravity
when liquid splashed and is at the top, the force bringing the liquid back down to the midpoint is gravity. This brings the liquid back to its equilibrium level.
Answer:
Gravity
Explanation:
The splashing of liquid resembles like an oscillation .
The force acting on liquid to pull it down is gravity and the force bouncing it back is caused by normal reaction
Hence gravity is the answerA net constant force of 1500 n gives a toy rocket an acceleration of 2. 5 m/������ 2. What is the mass of the rocket?
Answer:
600Kg
Explanation:
Force= mass × acceleration
mass= 1500/2.5
600kg
The mass of the rocket will be 600 kg.In the International System of Units (SI), the kilogram is the unit of mass.
What is mass?Mass is a numerical measure of inertia, which is a basic feature of all matter. It is, in effect, a body of matter's resistance to a change in speed or position caused by the application of a force.
In the International System of Units (SI), the kilogram is the unit of mass.
The given data in the problem is;
The net constant force is, F= 1500 N
The acceleration is,a=2. 5 m/s²
The mass of the rocket is,m=?
[tex]\rm F= mass \times acceleration \\\\ m = \frac{F}{a} \\\\ m= \frac{1500}{2.5}\\\\ m = 600 \ kg[/tex]
Hence the mass of the rocket will be 600 kg.
To learn more about the mass refer to the link;
https://brainly.com/question/13073862
#SPJ4
What causes changes in the orbit of objects in the solar system.
What is current of 12 ohm? help me pleasee
Answer:
the current of 12 ohm is 2Amps
Which planets are generally referred to as the ice giants?.
Answer:
The correct answer is Uranus and Neptune
5. A mass attached to a spring oscillates and completes 50 full cycles in 30 s. What is the time period and frequency of this system?
Please show all of your work.
frequency:
⇒ oscillation / time taken
⇒ 50 / 30
⇒ 5 / 3
⇒ 1.667
≈ 1.7 Hz
period:
⇒ 1 / frequency
⇒ 1 / 1.7 ( when taken frequency as 5/3, period is 0.6 s )
⇒ 0.6 seconds
Frequency:-
[tex]\\ \rm\rightarrowtail \nu=\dfrac{50}{30}=\dfrac{5}{3}=1.67Hz[/tex]
Time period::
[tex]\\ \rm\rightarrowtail \dfrac{1}{\nu}[/tex]
[tex]\\ \rm\rightarrowtail \dfrac{1}{1.67}[/tex]
[tex]\\ \rm\rightarrowtail 0.7s[/tex]
A photon with wavelength 11. 0 nm is absorbed when an electron in a three-dimensional cubical box makes a transition from the ground state to the second excited state
For a photon with wavelength 11. 0 nm, the side length LL of the box is mathematically given as
L=1.414*10^{-27}m
What is the side length LL of the box?Generally, the equation for the change in energy is mathematically given as
[tex]dE=\frac{hc}{\lambda}[/tex]
Therefore
[tex]\frac{hc}{\lambda}=\frac{6h^2}{8ml}\\\\L=\sqrt{6h\lambda}{8mc}\\\\L=\sqrt{\frac{6(6.626*10^{-34})*11.0*10^{-9}}{8(9.11*10^31)(3*10^8)}}[/tex]
L=1.414*10^{-27}m
In conclusion, the side length LL of the box is
L=1.414*10^{-27}m
Read more about Mesurement
https://brainly.com/question/17972372
The side length of the box for a photon of wavelength 11. 0 nm will be [tex]\rm L = 1.414 \times 10^{-27}[/tex] m.
What is wavelength?The distance between two successive troughs or crests is known as the wavelength. The peak of the wave is the highest point, while the trough is the lowest.
The change in the energy of the photon is found as;
[tex]\rm dE = \frac{hc}{\lambda} \\\\ \frac{hc}{\lambda} =\frac{6h^2}{8ml} \\\\ L= \sqrt{\frac{6h\lambda}{8mc} } \\\\ L = \sqrt{\frac{6 \times 6.626 \times 10^{-34}\times 11 \times 10^{-9}}{8 \times 9.11 \times 10^{31} \times 3 \times10^8} } \\\\ L= 1.414 \times 10^{-27} \ m[/tex]
Hence the side length of the box for a photon of wavelength 11. 0 nm will be [tex]\rm L = 1.414 \times 10^{-27}[/tex] m.
To learn more about the wavelength refer to the link;
brainly.com/question/7143261
#SPJ4
Hello people~
help me with this question ^^
An electroscope is a device which is used to find if an object is
(a) charged
(b) magnetic
(c) free of cracks
(d) hot
Answer:
Charged
Explanation:
Look at a example below
You took a pen Rubbed it on your hair fastly for 2 mins If you took that rubbed part towards paper ,both will be attracted and joined for some while.A person is dragging a packing crate of mass 100 kg across a rough horizontal floor where the coefficient of kinetic friction is 0. 400. He exerts a force f sufficient to accelerate the crate forward. At what angle above horizontal should his pulling force be directed in order to achieve the maximum acceleration?.
For a person dragging a packing crate of mass 100 kg, the angle above the horizontal is mathematically given as
theta = 21.8 °
What angle above horizontal should his pulling force be directed in order to achieve the maximum acceleration?.Generally, the equation for the Force is mathematically given as
[tex]Fnet = F_{costheta} - F_{friction}[/tex]
Therefore
Fnet = Fcostheta - mu*((mg) - Fsintheta)
sin theta = mu*costheta
mu = tantheta
theta = tan^-1(mu)
theta = tan^-1(.400)
theta = 21.8 °
In conclusion, the angle above horizontal
theta = 21.8 °
Read more about Angle
https://brainly.com/question/14362353
15. A 0.500-kg mass suspended from a spring oscillates with a period of 1.50 s. How much mass must be added to the object to change the period to 2.00 s?
The answer is 0.389 kg but please show your work.
Let's look at relationship
[tex]\\ \rm\rightarrowtail T=2\pi\sqrt{\dfrac{m}{k}}[/tex]
[tex]\\ \rm\rightarrowtail T\propto \sqrt{m}[/tex]
Hence
[tex]\\ \rm\rightarrowtail \dfrac{T_1}{T_2}=\sqrt{\dfrac{m1}{m2}}[/tex]
[tex]\\ \rm\rightarrowtail \dfrac{1.5}{2}=\sqrt{\dfrac{0.5}{m2}}[/tex]
[tex]\\ \rm\rightarrowtail 0.75^2=\dfrac{0.5}{m2}[/tex]
[tex]\\ \rm\rightarrowtail m_2=\dfrac{0.5}{0.75^2}[/tex]
[tex]\\ \rm\rightarrowtail m_2=0.889[/tex]
Hence
Mass needs to added =0.889-0.500=0.389kgAnswer
Mass needs to added =0.889-0.500=0.389kg
Explanation:
A laser beam is used to levitate a metal disk against the force of earth's gravity.
(a) derive an equation giving the required intensity of light, i, in terms of the mass m of the disk, the gravitational acceleration g, the speed of light c, and the cross-sectional area of the disk a. assume the disk is perfectly reflecting and the beam is directed perpendicular to the disk. (do not substitute numerical values; use variables only.)
i =
(b) if the disk has mass 3.89 g and radius 2.40 cm, find the necessary light intensity.
(c) give two reasons why using light pressure as propulsion near earth's surface is impractical.
The necessary light intensity of the disk if the disk has mass 3.89 g and radius 2.40 cm is 6.483 x 10^12cd.
Calculations and Parameters:a. Given that:
i= intensity of light m= mass of disk g= gravitational acceleration c= speed of light a= cross-sectional area of the diskI = P/A
= Force x Speed/Area
Gravitational force, F= GM1M2/r^2
F= ma, F= mg
I= mg x c/q
That is,
i= mass x gravitational acceleration x speed/area
b.
Mass= 3.89g
Radius, r= 2.40cm
i=?
i= mg x c/a
Speed of light= 3.0 x 10^8 m/s
Area, a= /pi r^2
= 3.142 x (0.024)^2
= 3.142 x 0.000576
= 0.0018m^2.
i= 3.89 x 10 x 3.0 x 10^8/0.0018
i= 6.483 x 10^12cd.
c. Light has no mass, therefore, it lacks momentum and cannot exert pressure for propulsion of materials.
Read more about light intensity here:
https://brainly.com/question/11355584
What is the Atomic Mass / Weight for silver? *Round your answer to the nearest whole number
What is one time constant of a 4. 7 μf capacitor in series with a 22 kω resistor?
Hi there!
We can solve for the time constant using the following:
[tex]\tau = RC[/tex]
τ = Time Constant (s)
R = Resistance (Ω)
C = Capacitance (F)
Simply plug in the values. Remember that:
4.7 μF = 4.7 * 10⁻ ⁶ F = 0.0000047 F
22kΩ = 22 * 10³ Ω= 22000Ω
Solve:
[tex]\tau = 0.0000047 * 22000 = \boxed{0.1034 s}[/tex]
How many stars are in a typical spiral galaxy, like our own?.
Answer:
200 billion to 400 billion stars in a typical spiral
Explanation:
hope this helps
have an awesome day -TJ
Help its due in 2 hours
Physics Word Problem
An archer shoots an arrow at a 75 m distant target; the bull’s-eye of the target is at same height as the release height of the arrow. If d = 75 m and v = 37 m/s. At what angle must the arrow be released to hit the bull’s-eye if its initial speed is 37m/s?
Answer:
15.6 degrees
Explanation:
What is the difference between gravity and acceleration?
Aceleration refers to motion but gravity refers to force
Acceleration is change of velocity with time while gravity is the force of attraction pulling objects. When this force pulls an object it tends to move with a certain type of acceleration called acceleration due to gravity. This is equal to 9.8 m / s^2 for earth
Acceleration is the rate of change in velocity. While g is the acceleration due to gravity. The pace at which a body's velocity varies is represented by acceleration, which is a vector quantity.
What is acceleration?The rate of change of velocity with respect to time is known as acceleration. According to Newton's second law, the eventual effect of all forces applied to a body is its acceleration.
[tex]\rm a = \frac{v-u}{t}[/tex]
u is the initial speed
v is the final speed
t is the time interval
a is the acceleration of the ball
Gravitation is a natural law by which all things with all matter are attracted towards one another.
g is the acceleration due to gravity. whose value is equal to 9.81 m/sec².The value of the gravitational acceleration varies according to the height and the planet.
The value of the gravitational acceleration on the earth is 9.81 m/sec².While the value of g at the moon is 1.6333 m/sec².
Hence acceleration is the rate of change of velocity. While g is the acceleration due to gravity.
To learn more about the acceleration refer to the link;
https://brainly.com/question/2437624
#SPJ4
Why wouldn’t you move during an earthquake?
Answer:
So you maybe don't fall, have something fall on you, and for a bunch of different reasons. EARFQUAKES are really dangrous.
Explanation:
Hope this helps you!
2. What would be the effect on your body if you did not have kidneys? Page
112
A. My body would not absorb nutrients.
B. Waste would collect in the blood and become toxic
C. I could not eat gluten
D. Saliva could not be produced
Answer:
b
Explanation:
the kidney eliminates waste from the blood hence no kidney will result in accumulation of waste
The inner planets are different from the outer planets mainly because they are:.
Answer:
The inner planets are closer to the Sun and are smaller and rockier. The outer planets are further away, larger and made up mostly of gas. The inner planets (in order of distance from the sun, closest to furthest) are Mercury, Venus , Earth and Mars.
Explanation:
20. Free-Body Diagram You are sitting in the back seat of a
car going around a curve to the right. Sketch motion
and free-body diagrams to answer these questions:
a. What is the direction of your acceleration?
b. What is the direction of the net force on you?
Centripetal acceleration
#1
Direction towards centre#2
Direction of force also towards centre
Which of the following was correctly predicted by Einstein's theory of gravity?
(A) the origin of mass
(B) law of refraction
(C) the measure of G
(D) light deflected around large objects because of their gravity
Answer:
(D) light deflected around large objects because of their gravity
I hope this helps you
:)
Scientists observed a rocky, rotating object orbiting in space. It was 250 km wide. The rocky object was located several times farther away from the sun than the earth
The rocky object orbiting in space is most likely referred to as an asteroid.
What is an Asteroid?This is referred to a rocky object which revolve around the sun and are considered too small to be called a planet.
Asteroids was observed with the use of a telescope and is around 250 km wide thereby making it the most appropriate choice.
Read more about Asteroids here https://brainly.com/question/11996385
A bottle of soda always has a space between the cape and the top of the liquid. Explain
Answer:
All soft drinks contain water. When soft drink bottles are chilled in sub-zero temperatures, the water on account of its anomalous expansion expands. Thus, to provide space for expanding water, soft drink bottles are not completely filled as otherwise they will burst.
Explanation:
Answer:
Soft drink bottles are filled leaving some space between the lid/cap and the liquid level.
Explanation:
The reason is that the soft drinks are cooled below room temperature. Sometimes they are kept in the hot Sun and weather. They are subject to a big temperature variation. Also, there are gases like CO2 mixed in the drink. So the gases come out of the liquid and expand due to heat. That creates high pressure.
Water expands when it is cooled to 4 deg. C. But the bottle (glass) contracts when it is cooled. So if there is no air gap, then volume of water (cool drink) will become more than the inside volume of the bottle. Then the bottle will break due to pressure from water expansion around 8 deg. to 4 deg.C.
When a bottle is opened, due to pressure difference, and temperature difference, the gases come out of drink in the form of bubbles. So cold drink overflows out.
Also, the soft drink bottles are capped tightly. When an opener is used to open it using some force upwards, the pulling force also moves the soft drink bottle upwards. So just after the lid comes off, the top part of the drink comes out due to the pull. So some drink spills on people who open or, it falls outside.
In order to prevent these problems, some gap is left open between the surface of the soft drink and the top of the bottle.
A bicycle wheel of radius 40. 0 cm and angular velocity of 10. 0 rad/s starts accelerating at 80. 0 rad/s2. What is the centripetal acceleration of the wheel at this time point?
The magnitude of the centripetal acceleration of the bicycle wheel is 40 m/s².
Centripetal acceleration of the wheel
The centripetal acceleration of the bicycle wheel is the inward or radial acceleration of the bicycle on the circular path.
The magnitude of the centripetal acceleration of the bicycle wheel is calculated as follows;
a = ω²r
where;
ω is angular speed
r is the radius of the circular path
a = (10)² x 0.4
a = 40 m/s²
Thus, the magnitude of the centripetal acceleration of the bicycle wheel is 40 m/s².
Learn more about centripetal acceleration here: https://brainly.com/question/79801
The acceleration of a body travelling in a circular route is known as centripetal acceleration. The centripetal acceleration of the wheel at this time point is 40 m/sec².
What is centripetal acceleration?The acceleration of a body travelling in a circular route is known as centripetal acceleration. It is given by the formula,
[tex]a_c = \dfrac{v^2}{r} = \omega^2 r[/tex]
The centripetal acceleration of the wheel with angular velocity 10 rad/sec and velocity 40cm (0.4 m) can be written as,
[tex]a_c = \omega ^2\times r\\\\a_c = (10)^2\times 0.4\\\\a_c = 40\rm\ m/sec^2[/tex]
Hence, the centripetal acceleration of the wheel at this time point is 40 m/sec².
Learn more about Centripetal acceleration:
https://brainly.com/question/14465119
#SPJ4
Planets A and B have the same mass, but planet A is half the size of planet B.
Which statement correctly explains the weight you would experience on each
planet?
A. You would weigh the same on both planets because the masses
of the planets are the same.
B. You would weigh less on planet A because the distance between
you and the planet's center of gravity would be smaller.
C. You would weigh the same on both planets because your mass
would be the same on both.
O D. You would weigh more on planet A because the distance between
you and the planet's center of gravity would be smaller.
Answer:
the correct one is A hope it helps
Following a lecture on transverse and longitudinal waves, four students make venn diagrams to characterize these waves. which venn diagram is correct? a venn diagram with two intersecting circles. the circle on the left is labeled transverse waves with entries light, can travel through a vacuum, vibrating string, created by a disturbance and medium motion is perpendicular. the circle on the right is labeled longitudinal waves with entries medium motion is parallel, has regions of high and low density, sound and travel faster in a denser medium. the overlapping region has entries has speed and travels through solids. a venn diagram with two intersecting circles. the circle on the left is labeled transverse waves with entries light, can travel through a vacuum, vibrating string and medium motion is perpendicular. the circle on the right is labeled longitudinal waves with entries medium motion is parallel, has regions of high and low density, sound and travel faster in a denser medium. the overlapping region has entries, created by a disturbance, has speed and travels through solids. a venn diagram with two intersecting circles. the circle on the left is labeled transverse waves with entries light, all parts of the electromagnetic spectrum, vibrating string, medium motion is perpendicular. the circle on the right is labeled longitudinal waves with entries medium motion is parallel, has regions of high and low density, sound and can travel through a vacuum. the overlapping region has entries, created by a disturbance, has speed and travels through solids. a venn diagram with two intersecting circles. the circle on the left is labeled transverse waves with entries light, can travel through a vacuum, vibrating string and medium motion is perpendicular. the circle on the right is labeled longitudinal waves with entries medium motion is parallel, has regions of high and low density, all parts of the electromagnetic spectrum and travel faster in a denser medium. the overlapping region has entries, created by a disturban
Venn diagram B is correct. A Venn diagram is a type of graph that uses circles to depict connections between objects or fixed groups of entities.
What Is a Venn Diagram and how does It Work?A Venn diagram is a diagram that uses circles to depict relationships between objects or finite groups of objects. Circles that overlap share characteristics, whereas circles that do not overlap do not.
A Venn diagram with two intersecting circles. the circle on the left is labeled transverse waves with entries light, can travel through a vacuum, vibrating string and medium motion is perpendicular.
The circle on the right is labeled longitudinal waves with entries medium motion is parallel, has regions of high and low density, sound and travel faster in a denser medium.
The overlapping region has entries, created by a disturbance, has speed, and travels through solids.
Hence Venn diagram B is correct
To learn more about the Venn Diagram refer to the link;
https://brainly.com/question/1703814
why did united states withdraw from vietnam war
the Army had a fight in unfamiliar territory but with the combination of disadvantages and a loss of public support what to the United States withdrawing from Vietnam
Explanation:
I hope this helps
Franklin is loading a truck at work and his truck has a ramp that helps him move the boxes up. the incline of the ramp is 9 feet long and the top of the ramp is 3 feet off of the ground. what is the mechanical advantage of the incline franklin is using?
Answer:
Explanation:
Formula
MA = length of ramp / height
Givens
ramp length = 9 feet
height = 3 feet
Solution
MA = 9 / 3
MA = 3
Answer Mechanical advantage = 3
Use F = 1/T as your basis:
8. If your heart rate is 150 beats per minute during strenuous exercise, what is the time per beat in units of seconds?
The answer is 0.400 s/beats but please show your work.
Heart rate is given by
150beats/minConvert to per second
150/60=5/2=2.5beats/sNow
Frequency:-
[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{T}[/tex]
[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{2.5}[/tex]
[tex]\\ \rm\rightarrowtail \nu=0.4Hz[/tex]
Two pistons are in an enclosed volume with fluid in between them, such that
movement in one piston affects the location of the other piston, as shown in
the image below. If an explosion occurs in the piston on the left such that it
moves 1 m, what is the distance that the piston on the right will move
(assuming that friction can be neglected)? (Recall that work on an object is
equal to the force on the object times the distance it is moved, and that work
is conserved.)
Cross-sectional area - 25 mm
Cross-sectional area = 0,5 m
A. 2 m
B. 0.5 m
C. 1 m
D. 0.25 m
Answer:
The pressure in the fluid just below Piston 1 is
p_1=F_1/A_1=361\text{ Pa}.p
1
=F
1
/A
1
=361 Pa.
The pressure in the fluid just below Piston 2 is the same according to Pascal's law:
p_2=p_1=361\text{ Pa}.p
2
=p
1
=361 Pa.
The force being exerted on Piston 2 to keep the two pistons in equilibrium is
F_2=p_2A_2=330\text{ N}.F
2
=p
2
A
2
=330 N.
Explanation:
Question 3
The FRC robot is rushing to pick up a game ball to shoot. The robot
is at rest and then it travels 30m in 1.96s. What is the robot's
acceleration in this time?
Answer:
15.61 m/s^2
Explanation:
From 3 rd equation of motion
s=ut+1/2at^2
given s = 30
u= 0 ( as body was at rest)
t= 1.96s
30=0*1.96+1/2a(1.96)^2
30=0+1/2a(1.96)^2
a=2*30÷(1.96)^2
a= 15.61 m/s^2 (approx)