A crane lifts a 450 kg concrete to the top of a 50 m building in 5 s.
Assuming g= 10 m/s
)
2
a) The potential energy of the concrete.
, calculate;
b) The power developed by the crane

The force at which the arrow moved when an archer shot a 0.04 kg arrow at a target is 280 N.

Force is the product of mass and acceleration.

To calculate the amount of force the arrow moves, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 2

Hence, the force at which the arrow moved is 280 N.

Learn more about force here: https://brainly.com/question/18762601

The time taken by the runner to do the work is 1.42 seconds.

Given the data in the question;

Power can be simply referred to as the quantity of energy transferred per unit time.

It is expressed as;

[tex]P = \frac{W}{t}[/tex]

Where W is work done and t is time elapsed.

To determine the time it took the runner to do the work, we substitute our given values into the expression above.

[tex]P = \frac{W}{t} \\\\t = \frac{W}{P} \\\\t = \frac{457J}{321W} \\\\t = \frac{457 kgm^2/s^2}{321 kgm^2/s^3}\\\\t = 1.42s[/tex]

Therefore, the time taken by the runner to do the work is 1.42 seconds.

Learn more about Power and Work: https://brainly.com/question/2962104

Answer:

a particular level of electical potential from a power source

Answer:

The apparatus would need to be extremely delicate because of the very small values being measured, the gravitational attraction of two massive objects.

(I) the torsion constant, measuring the deflection of massive objects would be very small and difficult to measure accurately

(II) since all surrounding objects are massive, it is difficult to remove the effect of such objects from forces being measured

(III) to consider a massive object as having all of its mass at its center, the massive object would need to be uniform throughout - any nonuniformity of the object would affect the calculations

(IV) all physical measurements would need to be made with utmost accuracy because of the relatively small distances involved with regard to the extremely small force being measured

(V) today laser measurements would assist in measuring small deflections accurately

The specific heat capacity of the calorimeter used in mixing the water is determined as 21.87 J/g⁰C.

The heat capacity of the calirometer is determined by applying the principle of conservation of energy.

Heat lost by the hot water = Heat gained by the calirometer

[tex]Q _w = Q_c\\\\M_w C_w\Delta \theta _w = M_c C_c\Delta \theta _c[/tex]

where;

mass = density x volume = ρV

Density of water = 1 g/ml

Mass of hot water = 1 x (50) = 50 g

Mass of water in calorimeter = 1 x (60) = 60 g

[tex]\Delta T_c = 5.5\\\\T - 25 = 5.5\\\\T = 30.5 \ ^0C[/tex]

[tex]50 \times 4.184 \times (65 - 30.5) = 60 \times C_c \times (30.5 - 25)\\\\7217.4 = 330C_c\\\\C_c = \frac{7217.4}{330} \\\\C_c = 21.87 \ J/g^0C[/tex]

Thus, the specific heat capacity of the calorimeter used in mixing the water is determined as 21.87 J/g⁰C.

The complete question is below

When using a different calorimeter, and mixing 50 ml of hot water at

65 degrees C with 60 ml of water in the calorimeter at 25 degrees C, the temperature of the calorimeter increased by 5.5 degrees C.

a. Calculate the heat capacity of this calorimeter?

Learn more about heat capacity here: https://brainly.com/question/16559442

Answer:

1. Why does a magnet exert force on another magnet when the two magnets are not in contact? The magnetic field from north to south increases when they're closer together, and when they repel the repelling force increases as well. This is all due to the magnetic field.

Correct me if I'm wrong, Hope this helps

Favor(Brainliest)

#Carryonlearning

Answer:

The foil makes the microwave spark it can smoke up and catch fie.

Explanation:

-The aluminum foil's sharp edges are what causes the fire, smoke, and sarks.

- Hope This Helps!

-Justin:)

Answer:

itll spark and catch fire

Explanation:

Answer:

ADD ALL THEM AND ANSER WILL BE THERE 19.O

Explanatio

Explanation:

Multiply the time by the acceleration due to gravity to find the velocity when the object hits the ground. If it takes 9.9 seconds for the object to hit the ground, its velocity is (1.01 s)*(9.8 m/s^2), or 9.9 m/s

Answer:

800 feet per sec.

Explanation:

Converting it over from 105.1mph to ft per sec is only about 154.15fps.

Answer:

yes

true

Explanation:

because earth is rotation

Answer:

you divide the distance by the time it takes to travel that same distance, then you add your direction to it.

Answer: Mass Number

Explanation:

Atomic number is the number of just protons;

Nuclear Model is a theoretical description of what an atom looks like;

Energy levels are the energy states that electrons are in;

However, mass number is by definition the number of protons + number of neutrons. :)

Distance is the factor that decreased the sound intensity.

As a sound wave carries its energy through a  medium, the intensity of the sound wave decreases with increasing distance from the source.

So we can conclude that distance is the factor that decreased the sound intensity.

Learn more about sound here: https://brainly.com/question/9349349

#SPJ1

By a factor of 1/9, the sound intensity decreased at 3 meters. Option A is correct,

Sound intensity is inverse proportional to the square of the distance.

The intensity of the sound is;

[tex]\rm I = \frac{1}{d^2} \\\\ \rm I = \frac{1}{3^2} \\\\ I=\frac{1}{9}[/tex]

By a factor of 1/9, the sound intensity decreased at 3 meters.

Hence, option A is correct,

To learn more about the sound intensity refer;

https://brainly.com/question/15089336

#SPJ1

Answer:

I = Q / t          definition of current I

Q = i t = 10 Coul/sec * 60 sec = 600 Coul

A 10-A current is maintained in a simple circuit with a total resistance of 209 ohms, then the net charge passes through any point in a circuit during a 1-minute interval would be 6000 Coulombs.

Charged material experiences a force when it is exposed to an electromagnetic field due to the physical property of electric charge. You can have a positive or negative electric charge.

Electric current is defined as the charge per unit of time.

The mathematical relation between current and the electric charge

I =Q/T

Let us first convert the time period of minutes into seconds

1 min = 60 seconds

10  min = 10*60 seconds

            =600 seconds

Q = I*t

   =10*600

   =6000 Amperes

Thus, the net charge that passes through any point in a circuit during a 1-minute interval would be 6000 Amperes.

To earn more about an electric charge from here, refer to the link;

brainly.com/question/8163163

#SPJ2

Hi there!

Recall that:
[tex]\Delta V = -\int\limits^a_b {E \cdot } \, dx[/tex]

Given an electric field, the potential difference can be solved by using integration. Similarly:
[tex]E = -\frac{dV}{dx}[/tex]

We can differentiate the electric potential equation to solve for the electric field.

Use the power rule:
[tex]\frac{dy}{dx} x^n = nx^{n - 1}[/tex]

Differentiate the given equation.

[tex]-\frac{dV}{dx}\frac{7}{x^2} =- \frac{dV}{dx}7x^{-2} = -(-14x^{-3}) = \frac{14}{x^3}[/tex]

Or:
[tex]\boxed{E(x) = \frac{14}{x^3}}[/tex]

The component of the electric field in that region is E = 14/x³ if the electric potential in a region is given by v(x)=7/x2

An electric field is an electric property that is connected with any location in space where a charge exists in any form. The electric force per unit charge is another term for an electric field.

We have:

The electric potential in a region is given by:

[tex]\rm V(x) = \frac{7}{x^2}[/tex]

We know the relation between potential difference and an electric field is given by:

[tex]\rm \triangle V = \int\limits^a_b {E.} \, dx[/tex]

If the electric field is given, then:

[tex]\rm E = -\frac{dV}{dx}[/tex]

[tex]\rm E = -\frac{d(7x^{-2} )}{dx}[/tex]

After differentiate:

[tex]\rm E = -(-14x^{-3})[/tex]  or

[tex]\rm E = \frac{14}{x^3}[/tex]

Thus, the component of the electric field in that region is E = 14/x³ if the electric potential in a region is given by v(x)=7/x2

Learn more about the electric field here:

https://brainly.com/question/26690770

#SPJ4

Answer:

The energy of a mechanical wave can travel only through matter. The matter through which the wave travels is called the medium (plural, media). The medium in the water wave pictured above is water, a liquid. But the medium of a mechanical wave can be any state of matter, even a solid.

Explanation:

Brainlest pls if can thank you ! i hope its helped

Explanation:

If the size and direction of the forces on the object are exactly balanced , then there is no net force acting on the object

Now

[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{T}[/tex]

[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{8\times 10^{-5}}[/tex]

[tex]\\ \rm\rightarrowtail \nu=0.125(10^5)[/tex]

[tex]\\ \rm\rightarrowtail \nu=12500s^{-1}[/tex]

[tex]\\ \rm\rightarrowtail \nu=12500Hz[/tex]

Answer:

m = 100 kg

Explanation:

F = ma

120 = m × 1.2

m = 120 ÷ 1.2

m = 100 kg

Answer:

Explanation: “Every action has an equal opposite reaction” is Newton’s third law. So in this situation, kicking the soccer ball is the action and the reaction is it rolling.

Answer:

you push against the ball and the ball pushes back at you

Your force->|<- ball's force

Explanation:

For every action, there is an equal and opposite reaction

Answer: 1.51 km

Explanation:

Coulomb's Law: The electrostatic force between two charge particles Q: and Q2 is directly proportional to product of magnitude of charges and inversely proportional to square of separation distance between them.

Or,   [tex]\vec{F}=k \frac{Q_{1} Q_{2}}{r^{2}}[/tex]

Where Q1 and Q2 are magnitude of two charges and r is distance between them:

Given:

Q1 = Charge near top of cloud = 48.8 C

Q2 = Charge near the bottom of cloud = -41.7 C

Force between charge at top and bottom of cloud (i.e. between Q: and Q2) (F) = 7.98 x 10^6N

k = 8.99 x 109Nm^2/C^2

So,

[tex]\begin{aligned}&7.98 \times 10^{6}=\left(8.99 \times 10^{9} \mathrm{Nm}^{2} / \mathrm{C}^{2}\right) \frac{48.8 \mathrm{C} \times 41.7 \mathrm{C}}{\mathrm{r}^{2}} \\&r=\sqrt{\frac{1.8294 \times 10^{13}}{7.98 \times 10^{6}}}=1.514 \times 10^{3} \mathrm{~m}=1.51 \mathrm{~km}\end{aligned}[/tex]

Therefore, the separation between the two charges (r) = 1.51 km

The sampling rate that's given regarding the CPU will produce a rate of 256kps.

The following can be gotten from the question:

Sampling rate = 8KHx

Number of bits = 32

The data rate will be:

= 32 × 8kbps

= 256kps

In conclusion, the sampling rate that's given regarding the CPU will produce a rate of 256kps.

Learn more about rates on:

https://brainly.com/question/2375289

The sampling rate specified for the CPU will result in a 256kb/s rate.Sampling rate is also known as the sampling frequency.

The number of samples per second collected from a continuous signal to create a discrete or digital signal is referred to as sampling rate or sampling frequency.

The given data in the problem is;

Sampling rate= 100 mhz cpu

Number of  bits=32

The rate of the data is;

[tex]\rm R = 32 \times 8 kb/ s \\\\ \rm R = 256 kb / s \\\\[/tex]

Hence the sampling rate specified for the CPU will result in a 256kb/s rate.

To learn more about the sampling rate refer to the link;

https://brainly.com/question/18917438

#SPJ4

Thermal energy is involved when water changes from one phase to the next. Option A is correct.

Latent heat is the heat needed for the phase change . When the temperature remains constant during melting or boiling, the added energy is employed in the phase change process.

The total number of water particles remains constant when water changes states throughout the water cycle.

When water alterations from one phase to the next, thermal energy is involved. Latent heat is the storage of thermal energy.

Hence, option A is correct.

To learn  more about the latent heat, refer;

https://brainly.com/question/87248

#SPJ2

(1) The image of an object placed further from the lens than the focal point will be upside down and smaller than the object.

(2) When light rays reflect, they bounce back.

(3)  Images formed by a concave lens will look magnified.

(4) When light rays enter a different medium, they bend.

The image of an object placed further from the lens than the focal point will be diminished and inverted.

Thus, the correct answer will be "upside down and smaller than the object".

The ability of light to bounce back when it strike a hard surface is known as refection.

A concave lens is diverging lens is usually virtual, erect and magnified.

The change in speed of light when it travels from medium to another medium is known as refraction. Refraction is also, the ability of light to bend around obstacles.

Learn more about reflection and refraction of light here: https://brainly.com/question/1191238

Answer:

It is upside down and larger than the object

They bounce back

Magnified

They bend

Explanation:

Answer:

A,B,C

Explanation:

because that is true

Answer:

It will cool down and become a cold black dwarf.

Explanation:

The electron degeneracy pressure slowly overwhelms gravity, and the white dwarf evaporates. As gravity overwhelms the electron degeneracy pressure, it will explode as a nova.

The difference between the majority viewpoint and the minority view is that the majority group is made to feel normal and the minority group is made to feel divergent.

A vantage point or point of view from which something is viewed or assessed is known as the viewpoint The story is narrated from a variety of perspectives, including two major ones and several smaller ones.

Most studies comparing majority versus minority influence argue the author, places a premium on influence in the sense of prevailing. In this context.

There is evidence that majorities have greater public influence than minorities, and that minority impact when it happens, is mostly latent. In the current version,

Hence the difference between the majority viewpoint and the minority view is that the majority group is made to feel normal and the minority group is made to feel divergent.

To learn more about the viewpoint refer to the link;

https://brainly.com/question/1043206

    Answer:  D        

Explanation:

Simplified for you.

Answer:

Voltage and current sources are two different sorts of sources that may be found in an electrical network. A voltage source has an emf forcing function, whereas a current source has a current forcing function.

☆ ------ ☆ ------ ☆ ------ ☆ ------ ☆

Answer:

2 kg

Explanation:

K.E. = 1/2 m v^2

81   = 1/2  m (9^2)

1 = 1/2 m

m = 2 kg