How are speed and velocity alike?

A. They both include the total distance traveled.
B.They both require a reference point.
C. They both describe a rate of motion.
D. They both include the direction of motion.

Answers

Answer 1

Answer:

c

Explanation:


Related Questions

is there a gravitational force of attraction between your phone and the earth?

Answers

Yes. When you let go of your phone it will fall to the earth because of Gravitational pull. If it did not exist the phone would float like in space

On hot sunny days or days with thin clouds, the temperature over the land is warmer than the temperature over the water. The warmer air rises and the cooler air moves over the land, producing sea breezes. This means that,
A: Water takes longer to heat up than the land
B: Soil warms up more slowly than the water
C: The air above the land becomes cool and rises
D: Land takes longer to heat up tan the water

Answers

Answer:

i think it would be a but i am not 100% sure on that

Which of the following equations correctly models a balanced single replacement reaction?

Answers

Answer:

d

Explanation:

is the answer

Recall: earth applies _____________ on Earth or equivalently

Answers

Answer:

gravitational attraction

The Atoms Family
Sub-atomic Particle Charge
Location in the atom Mass of particle
Proton
Neutron
Electron

Answers

What question are you asking?

The property of a moving object that makes it hard to stop is

Answers

Momentum is a property of a moving object that makes it hard to stop. It equals the object's mass times its velocity.

AFTER a ringing tuning fork passes very quickly in front of a stationary observer...
a) The sound waves are equally spaced out
b) The sound has a lower pitch
c) The sound waves have equal amplitudes
d) all could apply

Answers

According to the Doppler effect page I just read it should be D

Explain why a charged body loses its charge if we touch it with our hand?

if u answer me I can give u brainliest ☺️​

Answers

Answer:

Explanation: A charged body loses its charge when we touch it with our hand because some of the charge flows through our body to the ground earthing. As a result the charge on the body decreases every time we touch it. This is because of earthing.

Explanation:

yw .

Explanation:

When we touch a charged body, it loses its charge, due to the process of earthing. Our body is a good conductor of electricity. It transfers the charges to the earth

The faster an object moves:
A the more potential energy it has.
B the more kinetic energy it has.
C the faster its particles vibrate.
D the cooler it gets.

Answers

The answer would be B

Answer:

b the more genetic energy

Name two devices we use generators in. Describe how they work.

Answers

Answer:

There are two fundamental types of generators known as AC (alternating current) and DC (direct current) generators. While the technique of producing electricity is the same in both types, AC and DC power become different in terms of their applications – the way in which loads receive electric power.

Explanation:

An electric generator is a device that converts mechanical energy obtained from an external source into electrical energy as the output. ... Instead, it uses the mechanical energy supplied to it to force the movement of electric charges present in the wire of its windings through an external electric circuit.

what is the physical properties of radon

Answers

Answer:

1) Radon is colorless at standard temperature and pressure and it is the most dense gas known. At temperature below it's freezing point is has a brilliant yellow phosphorescence. It is chemically unreactive, it is highly radioactive and has a short half life.

2) 7.5 times heavier than air and more than 100 times heavier than hydrogen. The gas liquefies at −61.8 °C (−79.2 °F) and freezes at −71 °C (−96 °F). On further cooling, solid radon glows with a soft yellow light that becomes orange-red at the temperature of liquid air (−195 °C [−319 °F]).

Explanation:

I think this much is enough , as more information is given in other answer if more is needed just comment me I will answer you there only.

Empujamos un baúl 3 metros, para ello aplicamos una fuerza de 200 Newton. ¿Cuál es el trabajo realizado?

Answers

Answer:

Trabajo realizado = 600 Nm

Explanation:

Dados los siguientes datos;

Fuerza = 200 Newton

Distancia = 3 metros

Para encontrar el trabajo realizado; Trabajo realizado = fuerza * distancia

Sustituyendo en la ecuación, tenemos; Trabajo realizado = 200 * 3

Trabajo realizado = 600 Nm

The graph shows the amplitude of a passing wave over time in seconds (s) What is the approximate frequency of the wave shown? A. 6 Hz B. 0.2 0.4 Hz

Answers

Answer:

0.2 I took the test

Explanation:

I took the test

The time period of the whole wave cycle is 6 seconds but the time period of one complete wave is about 4 seconds here. The inverse of this time period is the frequency, that is 0.2 Hz.

What is frequency ?

Frequency by definition is the number of events per unit time. Frequency of a wave is the number of wave cycles in one second. It is the inverse of the time period.

Frequency is directly related to the energy of the wave. As the frequency increases, energy of the wave also increases. In the given graph the wave cycle is given for a time of 6 seconds.

The time period for one complete wave  is 4 second from the graph.

thus, T = 4 s

v =  1/T

  = 1/4 = 0.2 s⁻¹ or 0.2 Hz  

Therefore, the frequency of the wave shown, is 0.2 Hz.

Find more on frequency:

https://brainly.com/question/14316711

#SPJ5

Which of the following is a basic solution?

Answers

Answer:

what exactly are the following?

Use the following information about Earth and its moon to determine the distance between them. Earth's mass = 6.0 x 1024 kg Moon's tangential speed = 1,025 m/s Earth's radius = 6.4 x 10 m Moon's mass = 7.3 X 1022 kg 4.6 x 106 m O 3.8 x 108 m O 3.9 x 1011 m​

Answers

Answer:

3.8 × 108 m

Explanation:

Use formula: v^2 = G x m central / r

G = 6.77 e-11

Also, it was right on Edge.

Good luck!

The distance between Earth and its moon is 3.8×10⁸ m.

What is centripetal force?

A force that causes a body to follow a curved path is known as a centripetal force. It always moves in a direction that is the opposite of the body's velocity and in the direction of the immediate center of curvature of the path.

It is "a force by which bodies are dragged or driven, or in any manner tend, towards a point as to a center," according to Isaac Newton.

Given parameters:

Mass of the Earth: M = 6.0 × 10²⁴ kg.

Mass of the moon: m = 7.3 × 10²² kg.

Moon's tangential speed: v = 1,025 m/s

Let the distance between the center of Earth and the moon is r.

Hence,

GMm/r² = mv²/r

r = GM/v²

= 6.7 × 10 ⁻¹¹ × 6.0 × 10²⁴ / (1,025)²

= 3.82×10⁸ m.

Hence, by subtracting Earth's radius = 6.4 x 10⁶ m, we get, the distance between Earth and its moon is 3.8×10⁸ m.

Learn more about centripetal force here:

https://brainly.com/question/11324711

#SPJ2

How long will it take for a basketball spinning on someone’s finger to stop if it undergoes and angular acceleration of -0.15 rad/s and is traveling at 27 rad/s initially? How many revolutions will it make?

Answers

The basketball's angular velocity ω at time t is

ω = 27 rad/s + (-0.15 rad/s²) t

It comes to a stop when ω = 0, which happens for

0 = 27 rad/s - (0.15 rad/s²) t

t = (27 rad/s) / (0.15 rad/s²)

t = 180 s

In this time, the ball would undergoes an angular displacement θ of

θ = (27 rad/s) t + 1/2 (-0.15 rad/s²) t ²

Plug in t = 180 s and solve for θ :

θ = (27 rad/s) (180 s) - 1/2 (0.15 rad/s²) (180 s)² = 2430 rad

One complete revolution corresponds to a turn of 2π rad, so the ball makes

(2430 rad) / (2π rad/rev) ≈ 386.747 rev

or about 387 revolutions as it slows down.

What made heliocentrism scientific?

Answers

Heliocentrism is the astronomical model in which the Earth and planets revolve around the Sun at the center of the Solar System. Historically, heliocentrism was opposed to geocentrism, which placed the Earth at the center.

What is mass? (Specific simple answer)

Answers

Mass, in physics, quantitative measure of inertia, a fundamental property of all matter. It is, in effect, the resistance that a body of matter offers to a change in its speed or position upon the application of a force. The grater the mass of a body, the smaller the change produced by an applied force.

Answer:

Mass is the quantity of substance in an object

ANSWER BOTH ASAP NEED HELPPP

Answers

The first one is conduction and the second one is radiation

PLS ANSWER FAST WILL GIVE BRAINLY!!!!!!


.What are some observations we can make to determine if something has energy?

Answers

Answer:

if somthing is warm or if somthing moves it usally has energy

PLEASE HELPP IL GIVE BRAINLY AND HEART

if the land warms faster than the sea during the day, which breeze is experienced ( Assume during the day and that the land asd sea do not have the same temperature. )

A) Sea breeze
B ) Land breeze
C ) No breeze

Answers

Answer:

sea breeze

Explanation:

Answer:

A sea breeze

Explanation:

A wave frequency of 440 Hz travels through a medium at 343 m/s. Calculate the wavelength
for this wave.
150,920 m
1.28 m
97 m
0.078 m

Answers

Answer:

0.78 m

Explanation:

us the formula

speed = frequency x wavelength

343 = 440 x wavelength

343 / 440 = wavelength

wavelength = 0.78 m

I think the last option, you wrote wrongly, it is supposed to be 0.78 not 0.078 .

if you think I am wrong please do tell me, I will redo this.

hope this helps

What does it mean with the car accelerates but in the opposite direction of the car?​

Answers

Answer:

When an object slows down, its acceleration is opposite to the direction of its motion. This is known as deceleration.

Explanation:


The wood wrangler track team traveled South toward Garner Middle
School, they drove 20 km in 10 min, what was the VELOCITY of the team?
0.5 km/min
0.5 km/min SOUTH
2 km/min
2 km/min SOUTh

Answers

Answer:

2km/min

Explanation:

Velocity= change in distance / time taken

Velocity = 20km/10min=2km/min south

South is placed there to show what direction she went, as velocity has both magnitude and direction

A car manufacturer wants to change its car’s design to increase the car’s acceleration. Which changes should the engineers consider making to the design? increase the force that the engine provides decrease the force that the engine provides increase the mass of the car decrease the mass of the car increase the top velocity the car can travel decrease the top velocity the car can travel

Answers

Answer:

I. increase the force that the engine provides.

II. decrease the mass of the car

Explanation:

Newton's Second Law of Motion states that the acceleration of a physical object is directly proportional to the net force acting on the physical object and inversely proportional to its mass.

Mathematically, it is given by the formula;

Force = mass * acceleration

[tex] Acceleration = \frac {Force}{mass} [/tex]

In this scenario, a car manufacturer wants to change its car’s design to increase the car’s acceleration. Thus, the changes the engineers should consider making to the design is to increase the force that the engine provides and decrease the mass of the car.

Answers:

increase the force that the engine providesdecrease the mass of the carincrease the top velocity the car can travel

why Newton law of gravitational force is called universal law

Answers

Answer:

Newton's law of gravitational holes good irrespective of the nature of two bodies., i.e., big or small, at all times, at all locations and for all distances in the universe.

Explanation:

It is called so because it is applicable on all bodies having mass, and the bodies will be governed by the same law, that is newton's law of gravitation. Thus, as it is applicable universally, it is called as universal law.

It’s called “Universal law” because it pretty much applies across the whole universe

Hence why the name implies it lol

A force of 900 N pushes a wedge 0.10 m into a log. If the work done on the log is 50 J, what is the efficiency of the wedge?
HELPPPP

Answers

Answer:

55.56%

Explanation:

We'll begin by calculating the work done in pushing the wedge. This can be obtained as follow:

Force (F) = 900 N

Distance (s) = 0.1 m

Workdone (Wd) =..?

Wd = F × s

Wd = 900 × 0.1

Wd = 90 J

Finally, we shall determine the efficiency. This can be obtained as follow:

Work output = 50 J

Work input = 90 J

Efficiency =?

Efficiency = work output / work input

Efficiency = 50 / 90 × 100

Efficiency = 55.56%

Thus, the efficiency is 55.56%

Which of the following instruments measures time most accurately?
a. Sundial
b. quartz watch
c. pendulum clock
d. watch with balance wheel

Answers

Answer:

b) Quartz Clock

Explanation:

It's is a very type of clock which uses the vibration of quartz crystals to measure time accurately

B is the answer hope this helps

What type of Circuit do they use in a home? WHY ? (Simple circuit / Parallel circuit / Series circuit)

Answers

Answer:

Parallel Circuits

Explanation:

Loads can be operated on their own. If you had a series circuit, adding another light would dim the rest!


What name is given to the turning effect of a force?

Answers

Answer:

The turning effect of a force is known as the moment. It is the product of the force multiplied by the perpendicular distance from the line of action of the force to the pivot or point where the object will turn. When undoing a nut fastened to a screw by hand one realises that the amount of force required is a lot greater than when undoing the same nut using a spanner.

Explanation:

Other Questions
The plane has just (take) off 1. Give an example of propaganda that the Government inpeople believeAmong the Hidden tries to make the What is the probability of picking a red marble from a bag containing 4 white marbles and 7 green marbles? * The introduction of Caulerpa, also known as killer algae, into California was ultimately the result of _______.a.hull foulingb.the aquarium trade in exotic, nonnative aquatic speciesc.intentional released.an algae farming company Drag a graph to each category based on the slope of the graph. In this text, how do readers learn about Peter Hovenden's character?Athrough visual descriptions of HovendenBthrough Hovenden's opinions of othersCthrough the narrator's analysis of HovendenDthrough Hovenden's actions toward Annie Who was Hanfeizi? - TCI Chapter 21 Section 4 5,890,000=a10b a==? Use the solubility rules from the Lab 4 introduction and your knowledge of qualitative separation schemes from the lab to answer the following questions. The qualitative analysis experiment you did is actually an abbreviated version of a much larger analysis scheme in which many different cations are separated and identified. Suppose a mixture contains Ag , K , NH4 , Hg22 , Pb2 , Mg2 , Sr2 , Ba2 , Cu2 , Al3 and Fe3 . (a) Which of the following ions could you separate, by causing them to precipitate, with the addition of HCl?Ag+ K+ NH4+Hg22+ Pb2+ Mg2+Sr2+ Ba2+ Cu2+Al3+ Fe3+ (b) After the addition of HCl, the above sample is centrifuged and decanted. Which of the following cations remaining in the supernatant could you separate, by causing them to precipitate, with the addition of H2SO4? (Hint: H2SO4 is a source of sulfate ions. Select all that apply.)Ag+ K+ NH4+Hg22+ Pb2+ Mg2+Sr2+ Ba2+ Cu2+Al3+ Fe3+ What is the purpose of the lab, the importance of the topic, and the question you are trying to answer What is your hypothesis (or hypotheses) for this experiment?What methods are you using to test this (or each) hypothesis?Locate the data and observations collected in your lab guide. What are the key results? How would you best summarize the data to relate your findings?Do you have quantitative data (numerical results or calculations)? Do you have qualitative data (written observations and descriptions)? How can you organize this date for your report?What do the key results indicate?If you constructed graphs, what trends do they indicate in your data?Were there any problems with the experiment or the methods? Did you have any surprising results?What do the results tell you about your hypothesis(es)?How do the data support your claim above?If you could repeat the experiment and make it better, what would you do differently and why?Writing the Lab ReportNow you will use your answers from the questions above to write your lab report. Follow the directions below.Section I: Experimental OverviewUse your answers from questions 13 as the basis for the first section of your lab report. This section provides your reader with background information about why you conducted this experiment and how it was completed. Outline the steps of the procedure in full sentences. It also provides potential answers (your hypothesis/es) relative to what you expected the experiment to demonstrate. This section should be 13 paragraphs in length.Section II: Data and ObservationsUse your answers from questions 45 as the basis for the second section of your lab report. This section provides your reader with the data from the experiment, in a summarized and concise way. No paragraphs are required for this section, but you do need to include the key data and observations from which you will generate your analysis and discussion. This section is objective.Section III: Analysis and DiscussionUse your answers from questions 68 as the basis for the third section of your lab report. This section provides your reader with your interpretation of the data set. You will also give an example of any calculations or formulas you used to analyze your data. Also, you will want to include any graphs that you made and interpret them for the reader.If you did construct graphs, your Student Guide included information on which graphs to construct. Graphs should have the following:Appropriate titlesAppropriate labels for each axisAppropriate scales for each axisCorrect units for the dataComplete a rough sketch of each graph. Explain in one or two sentences what trend the reader should observe in each of your graphs.Mention any problems, unusual or unexpected data, or other factors with the experiment here, and suggest possible causes. This section can be somewhat subjective, unlike Section II, because you are free to include your personal interpretations or even speculation if it adds constructive, reasonable insight to the discussion. This section is variable in length, and should likely be the longest part of your report.Section IV: ConclusionsUse your answers from questions 9-11 as the basis for the fourth section of your lab report. In this section you will summarize the outcome of the experiment, and discuss how the original hypothesis(es) was (were) either supported or refuted. Use logic and reason in explaining your statements, and be sure to refer to specific data from your experiment that supports your argument.This section also demonstrates your understanding of the experiment, through your ability to offer constructive criticism about its design and make suggestions for future experimentation. There are always ways that experiments can be improved. Now that you are a veteran of this experiment and have experience with the procedure, offer some advice to the next scientist about what you suggest and why.This section should be 12 paragraphs long.OverallWhen complete, the lab report should be read as a coherent whole. Make sure that you connect different pieces with relevant transitions. Review for proper grammar, spelling, punctuation, formatting, and other conventions of organization and good writing. In theatre3. Who makes the show look good? Are inventions realized through inspiration or perspiration?Are inventions realized through inspiration or perspiration? Estimate the perimeter of the figure to the nearest whole number.perimeter: about __ units For which type of programs would a government most likely use a cost-benefit analysis? Select three options.changing a school lunch programbuilding a small or large courthousehiring new police officers and firefightersplanning when to repave a roadhiring new teachers for a school what does 2+3=8-4 im trying to do the work btu i dont know how to In a contraction, what do you put in place of the letters you take out? Choose 1 reacreational activity that you had done in the past. (Its either indoor or outdoor). Then share your experiencr on that activity. What is the end behavior of f(x) What is the area of a square with side lengths of 3/5 units? what is the slope of the line that passes through the points (2,-3) and (2,13)? write your answer in simplest form