Given the pressure in KPa, the value of the pressure reading in torr obtained is 20.73 torr
Conversion scale101.325 KPa = 760 torr
Data obtained from the question Pressure (KPa) = 2.76324 KPa Pressure (torr) =? How to determine the pressure in torrThe value of the pressure in torr can be obtained as illustrated below:
101.325 KPa = 760 torr
Therefore,
2.76324 KPa = (2.76324 × 760) / 101.325
2.76324 KPa = 20.73 torr
Thus, 2.76324 KPa is equivalent to 20.73 torr
Learn more about conversion:
https://brainly.com/question/2139943
use shorthand method to represent the electrochemical reaction in a lead storage battery.
The shorthand equation shows us in a glance what happens in the electrochemical reaction. For a lead storage battery, we have; PbSO4(s)/H2O//Pb (s) ,PbO2(s) /H2SO4
What is an electrochemical reaction?An electrochemical reaction is one in which electrical energy is produced from a chemical reaction. The equations in a lead storage battery are;
Anode: Pb (s) + HSO4- → PbSO4(s) + H+ + 2 e-
Cathode: PbO2(s) + HSO4- + 3 H+ + 2 e- → PbSO4(s) + 2 H2O
Overall: Pb (s) + PbO2(s) + 2 HSO4- + 2 H+ → 2 PbSO4(s) + 2 H2O
Hence, the shorthand notation of this reaction is;
PbSO4(s)/H2O//Pb (s) ,PbO2(s) /H2SO4
Learn more about electrochemical reaction: https://brainly.com/question/7484696
The ionization constant for acetic acid is 1.8 x 10-5; that for hydrocyanic acid is 4 x 10-10. in 0.1 m solutions of sodium acetate and sodium cyanide, it is true that
For the ionization constant for acetic acid is 1.8 x 10-5; that for hydrocyanic acid is 4 x 10-10, The solution is basic due to the generation of OH– ions.
What is an Ionization constant?ionization constant is simply defined as a constant that relies on the equilibrium that exists b/w ions and molecules of solution.
Generally, the equation for the Chemical reaction is mathematically given as
CH3C.O .O + H2_O ----> CH3COOH + O.H
Therefore
the anion C...N– receives H+ ion from water as it goes through hydrolysis.
Hence
xN– + H2..O ----><---- HxN + O..H–
In conclusion, The solution is basic due to the generation of OH– ions.
Read more about Chemical reaction
https://brainly.com/question/16416932
A 100g block of pine wood has a volume of 300 cm3. Would this block float on water (density of water is 1.0 g/cm3)?
A 120g block of pinewood has a volume of 300cm3. Would this block float on water? (HINT: Water has a density of 1g/cm3). a. No, because the block is denser than water.
Also here's a free meme
The density of a material represents the denseness of that material in a specific given area. If an object has a density less than water then it will float on water otherwise it will sink. Here the wood will float on water.
What is density?The density of a material denotes the measurement which compares the amount of matter an object has to its volume. An object with more matter in a certain volume has a high density. It is defined as the mass per unit volume.
The density is usually represented by symbol ρ or by the letter D. The formula used to calculate the density is:
Density = Mass / Volume
D = 100 / 300 = 0.33 g/cm³
Here the density of water is 1.0 g/cm³ which is greater than the density of pine wood. So the pine wood will float on water.
To know more about density, visit;
https://brainly.com/question/29775886
#SPJ2
How to tell if a reaction is double bond or single
Answer:
Single replacement is a reaction in which one element reacts with another compund to form another compound and another element.
planation:
If the reaction is double displacement then two molecules will be displaced and if it is single displacement reaction then only one element displaces.
What is displacement reaction?Displacement reactions are those reactions in which any element of the given reactant will be displaced by any another element.
If only one element from the reactant molecules will displace then it will be known as single displacement reaction. If two elements or atoms will be displaced from the reactant molecules then it will be known as double displacement reaction.
Hence if one element displaceed then called the single displacement reaction and if two elements displaces then called as the double displacement reaction.
To know more about displacement reactions, visit the below link:
https://brainly.com/question/13328989
why is burning not a pahse change
Answer:
This is because it is a physical change not a chemical change.
A sample of solid ammonium chloride decomposes on heating
solid ammonium chloride = ammonia gas + hydrogen chloride gas
A total of 2.4 * 10^21 molecules of gas is formed
How many hydrogen atoms are present in the gaseous products
The atoms of hydrogen in the products is 2.4 * 10^21 atoms of hydrogen
What is decomposition?The term decomposition has to do with a type of reaction in which a substance is broken down into into its components.
The decomposition of ammonium chloride occurs as follows;
NH4Cl → NH3 + HCl
If 6.02 * 10^23 hydrogen atoms are present in 6.02 * 10^23 molecules
x hydrogen atoms are present in 2.4 * 10^21 molecules
x = 2.4 * 10^21 atoms of hydrogen
Learn ore about decomposition:https://brainly.com/question/8009068
#SPJ2
How many molecules make up 32 g of Oz?
Answer:
Chemical formula of Oxygen is O2.
We know ,
1 mole of a substance contains 6.022×10^23, Avogadro’s Constat.
Here, Molar mass of O = 16u
And molar mass of O2 = 32u
And 32g of O2 = 1 mole of O2
It means that,
32g of O2 = 6.022×10^23 molecules
Answer:
The correct answer is given in the picture
This ANSWER IS ONLY CORRECT WHEN Oz STAND FOR OZONE
A balloon has a volume of 22.4 L at 273 K and 760 mm Hg. What will be the new volume if the pressure is
doubled to 2.00 atm?
The new volume of the gas in the balloon when the pressure is doubled is determined as 11.2 L.
General gas equation
The new volume of the balloon is determined by applying general gas equation as shown below
P₁V₁/T₁ = P₂V₂/T₂
Where;
P₁ is the initial pressure of the gas = 760 mmHg = 1 atmV₁ is the initial volume of the gas = 22.4 LT₁ is the initial temperature of the gas = 273 KP₂ is the final pressure of the gas = 2 atmT₂ is the final temperature of the gas = 273 KV₂ is the final volume of the gas = ?[tex]\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2} \\\\V_2 = \frac{P_1V_1T_2}{T_1P_2} \\\\V_2 = \frac{1 \times 22.4 \times 273}{273 \times 2} \\\\V_2 = 11.2 \ L[/tex]
Thus, the new volume of the gas in the balloon when the pressure is doubled is determined as 11.2 L.
Learn more about general gas equation here: https://brainly.com/question/4147359
You are pulling an object up 1 m with a 5 m ramp. You pull
with 20 N of force.
How much does the object weigh?
For an object 1 m long with a 5 m ramp, You pull with 20 N of force, The weight of the object is mathematically given as
W= 5714.3 N
What is the weight of the object ?Generally, the equation for the weight is mathematically given as
W = mg = F/Sinθ
W= 20/Sin0.2
W=20/ 0.0035
W= 5714.3 N
In conclusion, the weight of the object
W= 5714.3 N
Read more about Weight
https://brainly.com/question/11408596
Constance has an apple that weighs 85,000 milligrams and a peach that weighs 0.15 kilograms. which fruit has the greater mass? choose the words and numbers to complete the statements. convert the masses of both fruits to the same unit. 85,000 milligrams is the same as choose... grams. 0.15 kilograms is the same as choose... grams. the choose... has the greater mass.
The fruit which has the greater mass is peach i.e. 150 grams.
What is mass?Mass is a quantity which is used to define that what amount of substance will occupy any space or present in the given object.
We have given,
Weight of apples = 85,000 mg
Weight of peach = 0.15 kg
To compare the quantity first we have to convert both of these units in the same unit, and we know that:
In 1 kilogram = 1000 grams
And in 1 grams = 1000 milligrams
So, we convert both the units into grams as:
85,000 mg = 85,000 / 1000 = 85 grams
0.15 kg = 150 grams
So, the mass of peach is high.
Hence, peach has the greater mass.
To know more about mass, visit the below link:
https://brainly.com/question/15526412
Answer:
Constance has an apple that weighs 85,000 milligrams and a peach that weighs 0.15 kilograms. Which fruit has the greater mass? Choose the words and numbers to complete the statements.
Convert the masses of both fruits to the same unit.
85,000 milligrams is the same as
85
grams.
0.15 kilograms is the same as
150
grams.
The
peach
has the greater mass.tion:
[h+] for a solution is 2.65 x 10-2 m. this solution is a. acidic basic c. neutral
help will give brainliest
Answer:
A. acidic
Explanation:
There are roughly 720 billion metric tons of carbon in the atmosphere. An even bigger carbon sink is found in the oceans, which contain about 40 trillion metric tons. Human activities increase the amount of carbon stored in these reservoirs. The primary source of this increase is the combustion of fossil fuels, which generates about 6 billion metric tons of carbon per year. Deforestation adds an additional 2 billion metric tons annually. Whereas 25% of this flux ends up being absorbed by the oceans and another 25% is absorbed by plants, 50% stays in the atmosphere for the duration of its residence time. How much carbon will human activities add to the atmosphere over the course of five years
A production of 17.5 × 10⁹ tonnes of carbon will be added to the atmosphere over the course of five years.
How to determine the potential carbon generation due to human activities
In accordance with the principle of mass conservation, mass is not created nor destroyed, just transformed as we infer from statement.
The total carbon generation due to human activities is the sum of the effects derived from the combustion of fossil fuels and the deforestation, whose total over the course of five years is:
[tex]x = (5\,years)\cdot \left(6\times 10^{9}\,\frac{t}{yr} + 2\times 10^{9}\,\frac{t}{yr} \right)[/tex]
[tex]x = 35\times 10^{9}\,t[/tex]
And the part of this production that will remain in the atmosphere during its residence time is:
[tex]x' = 0.5\cdot x[/tex]
[tex]x' = 17.5\times 10^{9}\,t[/tex]
A production of 17.5 × 10⁹ tonnes of carbon will be added to the atmosphere over the course of five years. [tex]\blacksquare[/tex]
To learn more on carbon dioxide, we kindly invite to check this verified question: https://brainly.com/question/3049557
can you give me a real life example of a single replacement?
Answer:A single-replacement reaction is a chemical reaction in which one element replaces another in a compound. F₂ + 2NaCl → 2NaF + Cl₂, where F replaces Cl in NaCl. A double-replacement reaction is a reaction in which the metals in two ionic compounds exchange partners.
What is the ph of a solution of h2so4 that has [h3o ] = 5.45 × 10–5 m? round to the nearest hundredth.
The pH of a solution of H₂SO₄ that has [H₃O⁺] is 5.45 × 10⁻⁵ M, is 4.26.
What is pH?pH is define as the negative logarithm of the concentration of H⁺ or H₃O⁺ ions, and it is represented as:
pH = -log[H⁺]
Concentration of H₃O⁺ in H₂SO₄ solution = 5.45 × 10⁻⁵ M
pH of H₂SO₄ solution will be calculated as:
pH = -log(5.45 × 10⁻⁵)
pH = -(-4.26)
pH = 4.26
Hence required pH is 4.26.
To know more about pH, visit the below link:
https://brainly.com/question/522383
Answer:
4.26 is the answer
Explanation:
edge 2022
Giving brainiest and 100 points! <3
A. Cold front
The warm front symbol would be red and have circles instead of triangles.
The occluded front symbol would be purple with both, a triangle and a circle.
The stationary Front symbol is a mixture of both symbols from cold front and warm front.
hope that helps!!
All materials are made of _____________.
A. Insulators
B. Atoms
C. Stuff
D. Conductors
Answer:
b atoms
Explanation:
everything is made up of atoms
What factors might affect the amount of energy needed for
evaporation to occur and account for any differences between the temperatures
you observed?
6 important factors that affect evaporation are : 1. Wind assists evaporation; for example in clothes dry faster under a fan. 2. Heat assists evaporation; for example, in summer clothes dry faster than in winter.
Now have a free meme
Help ASAP!!! I need it now i have to write similar test tmrw
Answer and explanation:
(c)
A represents the activation energy (the minimum amount of energy needed to start a reaction).
B represents the overall change in energy (the difference between the energy of the reactants and products).
(d)
The reaction profile diagram shows that the reaction is exothermic because the energy change is negative (the products have less energy than the reactants) which shows that energy is lost or given out to the surroundings.
(e)
HCl gas doesn't conduct electricity, but hydrochloric acid does because in HCl, there are hydrogen ions that are free to move so they can carry a charge.
Hope this helps!
Use the drop-down menus to complete each statement. is used as construction materials. is important for the production of crops. is the loss of fertile soil.
Bedrock is used in the construction of structures, the topsoil is important for the production of crops and the loss of fertile soil is known as desertification.
Bedrocks, topsoil, and desertificationBedrocks are underlining rocks below soils. They are useful in construction works such as buildings, bridges, etc.Topsoils are the topmost portions of soils. They are usually rich in humus and organic matter and are therefore very good for agricultural crop production.Desertification is simply the loss of fertile soils and their transformation to barren, unproductive lands. Topsoils are lost and soils are rendered unsuitable for agriculture.More on desertification can be found here: https://brainly.com/question/24255548
Answer:
1. Bedrock
2. Topsoil
3. Desertification
Explanation:
Explain what the color change indicated about the changes in the concentrations of Co(H2O) 6 2+ and CoCl 4 2- in each trial?
The color of the system will change between pink and blue depending on the concentration of species.
What is equilibrium?Equilibrium is attained in a reaction when the rate of forward reaction is equal to the rate of reverse reaction. Now consider the equilibrium;
Co(H2O)6^2+(aq) + 4Cl^-(aq) ⇄ CoCl4^2-(aq) + 6H2O(l)
We know that Co(H2O)6^2+(aq) is pink while CoCl4^2-(aq) is blue hence, if the concentration of the species are changed, the color of the system will change accordingly.
Learn more about equilibrium: https://brainly.com/question/13524990?
Which coefficients correctly balance the formula equation below? NH 4 NO 2 (s) N 2 (g)+H 2 O(l) A. 1, 2, 2 C. B. 2, 1, 2 D. 1, 2, 1 1, 1, 2
The coefficients which correctly balance the formula for the equation of reaction of NH₄ and NO₂ is 1,1,1,2.
What is a Balanced Chemical reaction?This is the type of reaction in which the atoms of the elements of the reactants equal that of the product.
The balanced reaction is seen below where 2 was added to H₂O so as to balance the atoms of oxygen on both sides.
NH₄ + NO₂ (s) ⇒ N₂ (g)+2H₂O(l)
Read more about Balanced Chemical reaction here https://brainly.com/question/15355912
A mixture of 0.197 mol CO2 and 0.00278 mol H2O is held at 30.0 degrees celsius with a pressure of 2.50 atm. What is the partial pressure of each gas?
Considering the Dalton's partial pressure, the partial pressure of CO₂ is 2.465 atm and the partial pressure of H₂O is 0.035 atm.
Dalton's lawThe pressure exerted by a particular gas in a mixture is known as its partial pressure.
So, Dalton's law states that the total pressure of a gas mixture is equal to the sum of the pressures that each gas would exert if it were alone:
[tex]P_{T} =P_{1} +P_{2} +...+P_{n}[/tex]
where n is the amount of gases in the mixture.
Dalton's partial pressure law can also be expressed in terms of the mole fraction of the gas in the mixture. The mole fraction is a dimensionless quantity that expresses the ratio of the number of moles of a component to the number of moles of all the components present.
So in a mixture of two or more gases, the partial pressure of gas A can be expressed as:
[tex]P_{A} =x_{A} P_{T}[/tex]
Partial pressure of CO₂ and H₂OIn this case, you know:
[tex]n_{CO_{2} }[/tex]= 0.197 moles[tex]n_{H_{2}O }[/tex]= 0.00278 moles[tex]n_{T }=n_{CO_{2} }+n_{H_{2}O }[/tex]= 0.197 moles + 0.00278 moles= 0.19978 moles[tex]P_{T}= 2.50 atm[/tex]Then:
[tex]x_{CO_{2}} =\frac{n_{CO_{2}} }{n_{T} }=\frac{0.197 moles}{0.19978 moles} = 0.986[/tex][tex]x_{H_{2}O} =\frac{n_{H_{2}O} }{n_{T} }=\frac{0.00278 moles}{0.19978 moles} =0.014[/tex]Replacing in the Dalton's law:
[tex]P_{CO_{2} } =x_{CO_{2}} P_{T}[/tex]
[tex]P_{CO_{2} } =[/tex] 0.986× 2.50 atm
[tex]P_{CO_{2} } =[/tex] 2.465 atm
[tex]P_{H_{2}O } =x_{H_{2}O} P_{T}[/tex]
[tex]P_{H_{2}O } =[/tex] 0.014× 2.50 atm
[tex]P_{H_{2}O } =[/tex] 0.035 atm
Finally, the partial pressure of CO₂ is 2.465 atm and the partial pressure of H₂O is 0.035 atm.
Learn more about Dalton's partial pressure:
brainly.com/question/25181467
brainly.com/question/14119417
Malic acid, h2c4h4o5, is a diprotic acid with ka1 = 4. 0 × 10–4 and ka2 = 6. 3 × 10–6. Calculate the ph of a 0. 50 m solution of malic acid
The pH of a 0.50M solution of malic acid with ka1 = 4. 0 × 10-⁴ and ka2 = 6. 3 × 10-⁶ as described is; 1.85.
pH of Diprotic acids: Malic AcidSince, in a polyprotic acid the first hydrogen will dissociate faster than the others, If the Ka values differ by a factor of 10-³ or more, it is possible to approximately calculate the pH by using only the Ka of the first hydrogen ion.
However, the situation is different in this scenario.
On this note, the solution is as in the attached image.
Read more on Diprotic acids;
https://brainly.com/question/26015203
The pH of a 0.50 m solution of malic acid is 1.85.
What is pH?pH is potential hydrogen. It is the measurement of the acidity and basicity of any solution.
The ka1 = 4. 0 × 10⁻⁴
The ka2 = 6. 3 × 10⁻⁶
The solution is 0.50 m.
First calculate the ka value
[tex]ka = \dfrac{x^2}{0.50} \\\\x^2 = 0.50 \times 4 \times 10^-^4\\\\x^2 = 2 \times 10^-^4\\x^2 = \sqrt{2 \times 10^-^4} \\\\ x = [H^+] = 1.41 \times 10^-^2[/tex]
Now, calculate the pH
[tex]pH = -log [H^+]\\\\pH = -log[ 1.41 \times 10^-2]\\\\pH = 1.85[/tex]
Thus, the pH of a 0.50 m solution of malic acid is 1.85.
Learn more about pH
https://brainly.com/question/15289741
#SPJ4
which can provide the MOST energy in a ecosystem? a mushroom,coyote,a pine tree,a grassy meadow
Answer:
a grassy meadow
Explanation:
goo
duh
From the table of available reagents select the one(s) you would use to convert cyclohexanone to the following compound:
A reagent is a compound that is used for the detection of the absence or presence of another substance.
What are reagents?Your information is incomplete as the available reagents aren't given. Therefore, an overview will be given.
Reagents are the integral part of a chemical reaction as they facilitate a reaction. A reagent is usually used tests.
Some typical examples of reagents include Tollens reagent, Fehling's reagent, Million's reagent, etc.
Learn more about reagents on:
https://brainly.com/question/5601219
The reagents that would be used to convert cyclohexanone to the following compound: hydrogen cyanide, potassium cyanide, and H₃O⁺, heat.
What is cyclohexanone?It is an organic compound with a chemical formula [tex]\rm (CH_2)_5 CO[/tex].
The cyclohexanone is used as Insecticides, paint and varnish remover, synthetic resins, etc.
It is not harmful to humans and animals, inhalation cause irritation.
Thus, the compound: hydrogen cyanide, potassium cyanide, and H₃O⁺, heat.
Learn more about cyclohexane
https://brainly.com/question/15593706
#SPJ4
Drag each label to the correct location.
Determine whether each example represents continental drift or seafloor spreading.
oceanic ridges
concept of Pangaea
oceanic plates sliding
under continental crust
magma pushing
two plates apart
Continental Drift
Seafloor Spreading
The correct location of the given object on represents continental drift or seafloor spreading.
Continental drift: magma pushing two plates apart and concept of PangaeaSeafloor spreading: oceanic ridges and oceanic plates sliding under continental crustWhat is continental drift?The scientist Alfred Wegener is most closely connected with the concept of continental drift. Wegener wrote a paper outlining his notion that the continents were “drifting” across the Earth, occasionally crashing through oceans and into one another, in the early 20th century.
The seafloor spreading is the increase of seawater covering the land area. The spreading of seawater is decreasing the land area.
Thus, the correct location is:
Continental drift: magma pushing two plates apart and concept of PangaeaSeafloor spreading: oceanic ridges and oceanic plates sliding under continental crust.To learn more about continental drift, refer to the below link:
https://brainly.com/question/15122129
#SPJ6
Why is the addition of cold distilled water to the container holding the aspirin you are trying to isolate a necessary step and why should this step be carried out carefully?.
Answer:
The aspirin is more soluble in ethanol than water - the water helps the crystals separate from solution.
Explanation:
Hope this helps!
The pH of a 0.016-M aqueous solution of p-toluidine
(CH3C6H4NH2) is 8.60. Calculate Kb.
From the calculations performed, the Kb of the reaction is 9.9 * 10^-10
What is Kb?
The term Kb refers to the base dissociation constant of a solution. We have the following information from the question;
pH of the solution = 8.60
concentration of p-toluidine = 0.016-M
Recall that pOH = 14 - pH
pOH = 14 - 8.60 = 5.4
[OH] = Antilog (-5.4) = 3.98 * 10^-6 M
We have to set up the ICE table;
CH3C6H4NH2(aq) + H2O(l) ⇄ CH3C6H4NH3^+(aq) + OH^-(aq)
I 0.016 0 0
C -x +x +x
E 0.016 - x 3.98 * 10^-6 3.98 * 10^-6
Hence;
Kb = [3.98 * 10^-6]^2/[0.016 - 3.98 * 10^-6]
Kb = 9.9 * 10^-10
Learn more about Kb: https://brainly.com/question/12726841
Salt is often added to water to raise the boiling point to heat food more quickly. if you add 30.0g of salt to 3.75kg of water, what will be the change in the boiling point of your salt water? what is the new boiling temperature? assume the kf of water is 0.512*c/m. i know the answer is 100.14 degrees i just need to know the work and how to get there, thank you!
Assuming an ebullioscopic constant of 0.512 °C/m for the water, If you add 30.0g of salt to 3.75kg of water, the boiling-point elevation will be 0.140 °C and the boiling-point of the solution will be 100.14 °C.
What is the boiling-point elevation?Boiling-point elevation describes the phenomenon that the boiling point of a liquid will be higher when another compound is added, meaning that a solution has a higher boiling point than a pure solvent.
Step 1: Calculate the molality of the solution.We will use the definition of molality.
b = mass solute / molar mass solute × kg solvent
b = 30.0 g / (58.44 g/mol) × 3.75 kg = 0.137 m
Step 2: Calculate the boiling-point elevation.We will use the following expression.
ΔT = Kb × m × i
ΔT = 0.512 °C/m × 0.137 m × 2 = 0.140 °C
where
ΔT is the boiling-point elevationKb is the ebullioscopic constant.b is the molality.i is the Van't Hoff factor (i = 2 for NaCl).The normal boiling-point for water is 100 °C. The boiling-point of the solution will be:
100 °C + 0.140 °C = 100.14 °C
Assuming an ebullioscopic constant of 0.512 °C/m for the water, If you add 30.0g of salt to 3.75kg of water, the boiling-point elevation will be 0.140 °C and the boiling-point of the solution will be 100.14 °C.
Learn more about boiling-point elevation here: https://brainly.com/question/4206205
zinc sulfide with oxygen has (O2) to yield zinc oxide and sulfur oxide.
(i need the formula)
Answer:
The reaction between zinc sulphide and oxygen gives zinc oxide and sulfur dioxide. The chemical equation of the reaction is: 2ZnS + 3O2 → 2ZnO + 2SO2 2 moles of ZnS react with 3 moles of O2 to form 2 moles of ZnO and 2 moles of SO2
Explanation: