Answer:
62.02 g/mol
62.03 g/mol
Explanation:
62.03 g/mol
The molar mass of H2CO3 is 62.02 g/mol
What is molar mass?The molar mass of the compound is the sum of molar mass of indivitual atom multiple by number of that atom.
Calculation of molar mass of H2CO3 ,
Molar mass of H2CO3 = Molar mass of H*2 + Molar mass of C + Molar mass of O*3
Molar mass of H2CO3 = 1.0079*2 + 12.010 + 15.999*3
Molar mass of H2CO3 = 2.0158 + 12.010 + 47.997
Molar mass of H2CO3 = 62.02 g/mol
To learn more about Molar mass here.
https://brainly.com/question/12127540
#SPJ3
State the coefficient required to correctly balance the following chemical equation:
____KCl + ____Fe -----> ____FeCl2 + ____K
Answer:
2kcl+ fe= Fecl2+2K
so coefficient required be 2 for kcl and 2 forK
which is the best explanation for why organisms must meet their needs for resources?
a. So they can have more entertainment.
b. So they can survive and reproduce.
c. So they can continue sleeping all day.
d. So they can swim and fly faster.
Answer:
B
Explanation:
A isnt correct because animals have no emotions
C isnt correct because animals dont sleep all day
D isnt correct because not all organisms can swim or fly
B makes the most sense
2. Nitric oxide, NO, is made from the oxidation of NH3, and the reaction is represented by the equation:
4NH3 + 502 → 4NO + 6H2O
What mass of NO can be produced from 6.82 g of NH3?
Need asap, will give brainliest
Answer:
give me branlist it is 120nh
When 14 cal of heat are added to 12g of a liquid its temperature rises from 10.4 C to 12.7 C. What is the specific heat of the liquid
Answer:
0.51 cal/g.°C
Explanation:
Step 1: Given data
Added energy in the form of heat (Q): 14 calMass of the liquid (m): 12 gInitial temperature: 10.4 °CFinal temperature: 12.7 °CStep 2: Calculate the temperature change
ΔT = 12.7 °C - 10.4 °C = 2.3 °C
Step 3: Calculate the specific heat of the liquid (c)
We will use the following expression.
c = Q / m × ΔT
c = 14 cal / 12 g × 2.3 °C = 0.51 cal/g.°C
How many atoms are in 1.50 moles of Zinc?
A 497.9-gallon steel storage tank contains 91.7kg of methane. If the temperature is 23.7˚C what is the pressure inside the tank?
Answer:
74.08 atm
Explanation:
We'll begin by converting 91.7 kg to grams (g). This can be obtained as follow:
1 kg = 1000 g
Therefore,
91.7 kg = 91.7 kg × 1000 g / 1 kg
91.7 kg = 91700 g
Next, we shall determine the number of mole present in 91700 g of methane, CH₄. This can be obtained as follow:
Mass of CH₄ = 91700 g
Molar mass of CH₄ = 12 + (4"1)
= 12 + 4
= 16 g/mol
Mole of CH₄ =?
Mole = mass /Molar mass
Mole of CH₄ = 91700 / 16
Mole of CH₄ = 5731.25 moles
Next, we shall convert 497.9 gallon to litres (L). This can be obtained as follow:
1 gallon = 3.785 L
Therefore,
497.9 gallon = 497.9 × 3.785
497.9 gallon = 1884.55 L
Next, we shall convert 23.7 ˚C to Kelvin temperature. This can be obtained as follow:
T(K) = T(˚C) + 273
T(˚C) = 23.7 ˚C
T(K) = 23.7 °C + 273
T(K) = 296.7 K
Finally, we shall determine the pressure in the tank as follow:
Number of mole (n) = 5731.25
Volume = 1884.55 L
Temperature (T) = 296.7 K
Gas constant (R) = 0.0821 atm.L/Kmol
Pressure (P) =?
PV = nRT
P × 1884.55 = 5731.25 × 0.0821 × 296.7
P × 1884.55 = 139607.92
Divide both side by 1884.55
P = 139607.92 / 1884.55
P = 74.08 atm
Therefore the pressure in the tank is 74.08 atm
Balance the following equation and
then provide the coefficients for each
molecule.
_SnO2+ _H2 --> _Sn + _H20
Answer:
jbisibjas bhijjoijnc
Explanation:
what is the purpose of ash to soil conditioning.
Answer:
Question: what is the purpose of ash to soil conditioning?
answer: soil conditioner is a product that is added to soil to improve the soils physical qualities, it's usually the fertility of the soil and sometimes the mechanics of the soil. can be used to improve poor soils.
most wood ash contains a good percentage, about 25 percent, of calcium carbonate, which is an ingredient in garden lime. if your soil is highly acidic, with a pH of 5.5 or lower, amending with wood ash can raise the pH of your soil.
Copper has a specific heat of 0,900 J(g C). How much energy in kJ is needed to raise the temperature of a 700 g block of aluminum from 30.7°C to 82,1C?(show your steps)
Answer:
32.4 kJ
Explanation:
Given that:
Specific heat capacity fo copper, c = 0.9
Mass of copper, m = 700 g
Temperature change, dθ ;t2 - t1 = (82.1 - 30.7) = 51.4
Energy required, E = mcdθ
E = 700 * 0.9 * 51.4
E = 32382 J
Energy required on kJ
32382 / 1000
= 32.382 kJ
= 32.4 kJ
Which part of the kite catches the wind?
a Cover
b Frame
c Tail
d Kite string
Answer:
cover A
Explanation:
Answer:
cover sorry if im wrong
Explanation:
the cover makes the kiete float using air resisance
The only three colors of light the human eye can detect are red, green, and blue.
O True
O False
Kevin is working on a model that shows the positions of Earth, the Moon, and the Sun during the phases of
the Moon. How should he position them to show a New Moon?
Answer:
Explanation:what’s the answer
Answer: A. With Earth between the Moon and the Sun.
Explanation:
The energy we get from the sun is called THERMAL ENERGY and the energy from the Earth is called SOLAR RADIATION.
True
or
False
Which of these statements best supports the idea that a cell is the basic unit of a living organism?
A.
The number of cells in an organism affects the size of that organism.
B.
A tissue is composed of cells with similar structure and function.
C.
Some organisms have only one cell.
D.
All organisms are made up of one or more cells.
Answer:
The answer is D.
Explanation:
I searched it up :)
CAN SOMEONE PLEASE HELP ME I WILL MARK AS BRAINLIEST :(
Answer:
ok so i did the problem and the answer was 8e+29
Explanation:
i dont really know what the answer is but thats the answer i got
sorry if this didnt help
What is the mole ratio of nitrogen (N2) to ammonia (NH3)?
N2 + 3 H2 → 2 NH3
a.2:3
b3:1
c.3:2
d.1:3
Scientists often use controlled experiments to answer questions. Choose ALL correct statements about controlled experiments. A) No changes are made to a test group in an experiment. B) A control group is used for comparison to other groups. C) Only one change can be made per test group in an experiment. D) Changes can only be made to the control group in an experiment. E) A controlled experiment must have a control group and test group(s).
Answer:
B) A control group is used for comparison to other groups.
E) A controlled experiment must have a control group and test group(s).
Explanation:
Answer:
B & E should be the answers
What is the molarity of a solution made by dissolving 1.25 mol of HCl in enough
water to make 625 mL of solution?
A) 0.073 M
B) 2.00 M
OC) 28.5 M
D) 500 M
Answer:
Explanation:
C
2.00 M is the molarity of a solution made by dissolving 1.25 mol of HCl in enough water to make 625 mL of solution.
What are moles?A mole is defined as 6.02214076 × of some chemical unit, be it atoms, molecules, ions, or others. The mole is a convenient unit to use because of the great number of atoms, molecules, or others in any substance.
[tex]Molality = \frac{Moles \;solute}{Volume \;of \;solution \;in \;litre}[/tex]
[tex]Molality = \frac{1.25}{0.625}[/tex]
Molality = 2.00 M
Learn more about moles here:
brainly.com/question/8455949
#SPJ2
The burning of fossil fuels, like coal, oil, and natural gas, DO NOT contribute to the presence of greenhouse gases in the atmosphere.
True
or
False
Answer:
false statements because they are all nonrenewable resources
What is the molar mass of V(CO3)2?
Rock is driven underground and changed by heat and pressure. This describes
what?
a. Igneous changing to sedimentary
b. Metamorphic changing to sedimentary
C. Sedimentary changing to metamorphic
d. Sedimentary changing to igneous
Answer:
Explanation:
metamorphic
After mixing for three hours, the product is extracted into dichloromethane and the solvent is removed to give 245 mg of an oil. Using the moles of our protected aldehyde calculated earlier (2.96) and the molecular weight of the product (102 g/mol) predict the theoretical 100% yield of the product in milligrams. Round to the tenths place.
Answer:
the theoretical 100% yield of the product in milligrams is 302920 mg
Explanation:
Given the data in the question;
245 mg of an oil
Using the moles of our protected aldehyde calculated earlier (2.96)
the molecular weight of the product (102 g/mol) = 102000 mg/mol
so, the mass of aldehyde produced (100% yield) will be;
⇒ number of moles × molar mass
⇒ 2.96 mol × 102000 mg/mol
⇒ 302920 mol.mg / mol
⇒ 302920 mg
Therefore, the theoretical 100% yield of the product in milligrams is 302920 mg
Rick is creating a love potion for Morty. To make the potion, Rick's needs 51 mL of a mixture solution where 40% is carbonated water. After checking around his shop, Rick finds two solutions he could use. The first solution he found is 65% green tea, 15% carbonated water, and 20% whole milk. The second solution is 17% orange juice, 38% lemonade, and 45% carbonated water. How much of the first solution and second solution does Rick need to mix together to create the love potion? Round your final answers to one decimal place. You may solve this problem using any method we have learned in the class.
Answer:
The amount of the first solution rick needs to mix together to create the love portion is 8.5 mL
Explanation:
So as to make the love potion, we have;
The percentage of carbonated water in the love portion = 40%
The percentage of green tea in the first solution = 65%
The percentage of carbonated water in the first solution = 15%
The percentage of whole milk in the first solution = 20%
The percentage of orange juice in the second solution = 17%
The percentage of lemonade in the second solution = 38%
The percentage of carbonated water in the second solution = 45%
Let 'x' represent the volume in mL of the first solution added to make the love portion, and let 'y' be the volume in mL of the second solution added to make the love portion, we have;
x + y = 51...(1)
0.15·x + 0.45·y = 0.40×51 = 20.4
0.15·x + 0.45·y = 20.4...(2)
Solving the system of simultaneous equation by making 'y' the subject of each of the equation gives;
For equation (1)
y = 51 - x
For equation (2)
y = 20.4/0.45 - (0.15/0.45)·x = 136 - 3·x
y = 136/3 - (1/3)·x
Equating the two equations of 'y', gives;
51 - x = 136/3 - (1/3)·x
51 - 136/3 = x - (1/3)·x
17/3 = (2/3)·x
(2/3)·x = 17/3
x = (3/2) × (17/3) = 17/2 = 8.5
x = 8.5
y = 51 - x = 42.5
y = 42.5
Therefore, the amount of the first solution rick needs to mix together to create the love portion, x = 8.5 mL
In cells, the role of the mitochondrion is to:
Question 8 options:
keep the DNA enclosed
allow nutrients to come into the cell
make proteins
produce energy
Answer:
D produce energy
Explanation:
Mitochondria are membrane-bound cell organelles (mitochondrion, singular) that generate most of the chemical energy needed to power the cell's biochemical reactions.
Answer:produce energy
Explanation:
One component of smog is nitrogen
monoxide, NO. A car produces about 8 g of
this gas per day. What is the volume at STP?
Answer:
V = 5.97 L
Explanation:
Hello!
In this case, according to the ideal gas law:
[tex]PV=nRT[/tex]
We would need to solve for V as we know the temperature and pressure as the gas it at STP conditions (273 K and 1 atm respectively):
[tex]V=\frac{nRT}{P}[/tex]
Next, we compute the moles in 8 g of NO, given its molar mass of 30.01 g/mol:
[tex]n=\frac{8g}{30.01g/mol}=0.267mol[/tex]
Therefore, we obtain the following volume:
[tex]V=\frac{0.267mol*0.08206\frac{atm*L}{mol*K}*273K}{1atm}\\\\V=5.97 L[/tex]
Best regards!
Which of the following is a characteristic of a scientific theory? A.it explains how nature works. B.it is based on a single experiment. C.it should not be possible to replicate it's results. D.it should not be possible to replicate it's observations.
Answer:
A. It explains how nature works.
Explanation:
A scientific theory is an explanation, based on a body of evidence, of how something works or will behave.
The other three answers contradict scientific theory. Theories should be based on many experiments, and you should be able to replicate the results and observations.
why blood is separated into different parts
Answer:
Blood fractionation is the process of fractionating whole blood, or separating it into its component parts. This is typically done by centrifuging the blood. The resulting components are: a clear solution of blood plasma in the upper phase (which can be separated into its own fractions, see Blood plasma fractionation),
Answer: Centrifugal force is used to separate the components of blood – red blood cells, platelets and plasma – from each other. ... The red blood cells precipitate to the bottom of the bag, with the platelets above them, then the white blood cells and the plasma at the very top. Also because Each part of the blood has a different function. Separating the blood into parts lets patients get only the specific part or parts of the blood that they need. So a whole blood donation can be used for several patients.
Hope this helps have a awesome day/nigh❤️✨t
Explanation:
When a 17.9 mL sample of a 0.458 M aqueous nitrous acid solution is titrated with a 0.368 M aqueous potassium hydroxide solution, what is the pH after 33.4 mL of potassium hydroxide have been added
Answer:
pH = 12.90
Explanation:
THe reaction of HNO₃ with KOH is:
HNO₂ + KOH → KNO₂ + H₂O
That means 1 mole of nitrous acid reacts per mole of potassium hydroxide.
To solve this question, we need to find the moles of each reactant:
Moles HNO₂:
0.0179L * (0.458mol / L) = 0.00820 moles
Moles KOH:
0.0334L * (0.368mol / L) = 0.01229 moles
That means KOH is in excess. The moles in excess are:
0.01229 moles - 0.00820 moles = 0.00409 moles KOH = Moles OH⁻
The [OH⁻] is -Total volume = 17.9mL+33.4mL = 51.3mL = 0.0513L-:
0.00409 moles / 0.0513L =
0.0797M =[OH⁻]
pOH = -log[OH⁻] = 1.098
pH = 14 - pOH
pH = 12.90Consider an ideal gas enclosed in a 1.00 L container at an internal pressure of 18.0 atm. If the gas expands against a constant external pressure of 1.00 atm to a final volume of 10.0 L, what is the work done?
Now calculate the work done if this process is carried out in two steps.
1. First, let the gas expand against a constant external pressure of 5.00 atm to a volume of 2.00 L.
2. From there, let the gas expand to 10.0 L against a constant external pressure of 1.00 atm.
Answer:
A=-0.9117kJ.
B= -0.5065kJ
C=-0.8104KJ
Explanation: A s gas expands, it produces works . Therefore
Work done by gas expansion,
W = P Δ V
where P =external pressure,
ΔV = change in volume (final - Initial)
W = -1 atm (10 - 1 ) L
W = -9L. atm x 101.3J/ 1L. atm
W = 911.7Joules ≈ -0.9117kJ.
1.The work done in the first step is:
W= - 5.00 atm × (2.00 L - 1.00 L) = -5 atm·L ×(101.3J / 1 atm·L)
=506.5J = -0.5065kJ
2.The work done in the second step is:
w = - 1.00 atm × (10.0 L - 2.00 L) = -8atm·L ×(101.3J / 1 atm·L
=810.4J
w=-0.8104KJ
The work done in the whole process is:
w =-0.5065kJ --0.8104KJ = -1.3169KJ
HELP WHOEVER ANSWERS WILL BE MARKED BRAINLIEST!!!